Technical Info

Downloads

At a glance

Everything needed to add Waterlab hardware in one box: the inline sampling chamber and the Waterlab probe. Install the chamber in a bypass after the filter, connect the probe to the in.touch 3+ CO module, and you're ready for app-assisted water monitoring.

Gecko - Waterlab Kit - Chamber + Probe Bundle

Name: Gecko - Waterlab Kit - Chamber + Probe Bundle
SKU: 12564
Price: 791.45 GBP
Availability: InStock
Rating: 0 (0 reviews)

Works with in.touch 3+ and compatible in.y packs (2012+)

0 Reviews

SKU: 12564 LOGIN FOR TRADE PRICING

£791.45

INC VAT

1 In Stock

Same day dispatch by 14:00

QTY

Get it 20/02/2026Order by 20/02/2026 00:00

Next Day Delivery from £9 Secure Shopping Return within 28 days of receipt WhatsApp us: +44 7388 699 893

LID: 81295

Product Details

This kit combines the Gecko Waterlab chamber and Waterlab probe to fasttrack a clean, reliable install. The chamber provides a sealed sampling body with the correct seat depth and service valves; the probe lives in that controlled flow path for stable pH/ORP/temperature readings. Use the supplied barb fittings to match your bypass tubing (3/8", 1/2", or 3/4").

What it does

Chamber: holds the probe in a flowing sample stream; no fixed flow direction; compact footprint.
Probe: multiparameter sensor designed for the Waterlab system and in.touch 3+ integration.

Quick compatibility

Requires in.touch 3+ (CO module with water monitoring board) for monitoring features.
Works with in.yt / in.ye / in.yj spa packs manufactured 2012+.
Not supported on in.touch 2 or in.touch 3.

Install highlights

Plumb the chamber after the filter and before UV/ozone; run a bypass with 0.5 GPM.
Prefer nearvertical mounting (probe/valves within ±5° of vertical); allow clearance for service.
Connect the probe to the CO port's short cable on the in.touch 3+ spa module; confirm LED status.

Key Specifications (summary)

Chamber

Dimensions (L × W × H): 229.87 × 200.91 × 180.85 mm (9.05 × 7.91 × 7.12 in)
Weight: 618 g
Min flow (bypass): 0.5 GPM (recommended)
Max pressure: 18 psi ( 1.24 bar / 124 kPa)
Ports: barb fittings for 3/8" / 1/2" / 3/4" tubing
Flow direction: not directional

Probe

Dimensions (L × W × H): 60.96 × 36.70 × 264.66 mm (2.40 × 1.42 × 10.02 in)
Weight: 552.5 g
Ingress protection: IPX5
Operating/storage temperature: 0?80 °C (32?176 °F)

Integration

Plug the probe into the in.touch 3+ CO module's short cable (spa module). CO LED states: blinking blue = normal; full red = no probe; full yellow = probe not yet identified.

Installation & service

Bypass placement: after filter, before UV/ozone. Maintain =0.5 GPM through the chamber.
Orientation: probe tip immersed; valves/probe within ±5° of vertical.
Start-up: allow ~30 minutes for readings to stabilise once flow is established.
Calibration: typically once over service life (~2 years of use) via Gecko app with reliable pH buffers.
Storage (probe): keep sensing end wet; never store in deionised water.

Safety

Isolate and depressurise before cutting; use appropriate solvent weld/unions and allow full cure before power-up.
Re-check for leaks after the first heat cycle.