Connects Gecko Y- and X-Series spa control systems to your home network via long-range RF and Ethernet for full remote control. Upgrade to in.touch 3+ with Waterlab system for live water-quality monitoring and AI-driven treatment guidance (probe required).
- Hydrospares
- Hot Tub & Spa
- Equipment
- Audio & Connectivity
- WiFi Modules
- Gecko - in.touch - v3 & v3+
Gecko - in.touch - v3 & v3+
Remote Spa Controller - Works with Gecko waterlab (3+)
1 Reviews
£293.79
INC VATDiscontinued
Not available to be ordered, and never will be available to be ordered again
Get it 20/02/2026Order by 20/02/2026 00:00
LID: 4467
Product Details
The Gecko in.touch 3/v3 lets you manage your spa system from anywhere via the Gecko mobile app. Connected to your home network, the two factory-paired modules plug into any compatible spa pack and your router, no complex setup or Wi-Fi boosters required! The app can be used to adjust temperature, filtration, pumps, music, and delivery key systems alerts straight to your phone.
The in.touch 3+ module adds a built in waterlab interface for live pH, ORP, and temperature readings, plus AI-driven maintenance right in the app, completely removing any guesswork from your spa maintenance routine.
| Feature | in.touch 3 | in.touch 3+ (with waterlab system) |
|---|---|---|
| Mobile remote control | Yes | Yes |
| Over-the-air system updates | Yes | Yes |
| Long-range RF connectivity (868/915 MHz) | Yes | Yes |
| No Wi-Fi boosters or repeaters required | Yes | Yes |
| Gecko Waterlab integration | No | Yes |
| Real-time water quality data | No | Yes |
| AI-driven water analytics & treatment advice | No | Yes |
| One-button probe calibration & firmware rollback | No | Yes |
Module Specifications
Dimensions
- Home Transmitter (EN module) 82 × 70 × 24 mm
- Spa Transmitter (CO module) 86 × 70 × 23 mm (in.touch 3); 136 × 99 × 43 mm (in.touch 3+ w/ waterlab)
Summary
- Operating temperature: 20 °C to 60 °C
- Storage temperature: 30 °C to 85 °C
- Humidity: up to 85 % non-condensing
- Water ingress protection: IPX5 (CO module)
- Power input (EN module): 100240 V AC, 50/60 Hz via supplied PSU (UK/EU plugs)
- Network: 100 Mbps RJ45 LAN; requires Port 10022 open
- Compatibility: Gecko Y-Series (in.yt, in.ye, in.yj) and X-Series (in.xe, in.xm²), version 2 and higher (2012-onwards)
Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
Technical Specifications
| HTDIY SKU | 31185 |
| Listing Video - YouTube ID | mSHhE-MihLk?autoplay=1&mute=1&=loop=1&hd=1 |
| Sash 1 | Mobile Remote Control |
| Sash 2 | Long-Range RF Connectivity |
| Sash 3 | Over-the-Air System Updates |
| Sash 4 | Waterlab Integration (3+ Only) |
| Hide package contents in basket | Hide |
Reviews (1)
Reviews (1)
Roland Frankel8/20/2022
I was pleased that the in.touch works well with the Hydropool. They sell their own I.command unit but it is 2x the cost of this unit. Pairing was a little tricky as it is on an indoor unit with a lot of electrical screening
Aaron responded:
Thank you very much for your kind review.
Questions & Answers
No questions have been asked yet.