Balboa Heater - M7 - 2.0kW (Metal Box)
£241.98
INC VATProduct Details
A very common hot tub heater assembly for the metal GL spa packs by Balboa.
Used on: Spaform SF172, Catalina, Aegean, Hydropool, Canadian Spa, Hydrospa, Duplex Value Pack, Marquis Spa, Leisurite, Super Duplex Pack, Leisure Bay, Signature Spas, Hot Tubs Direct
Fitted with 12" M7 sensor technology to regulate spa water flow and temperature (Click HERE for Details)
Heater gaskets and split nut unions are also included making for easy installation and removal.
Solvent weld sockets for 2" pipe.
Fixed into place with 2 x metal straps
The heater comes complete with two M7 sensors, pre mounted at each end of the heater tube ready for connection to the control box. These sensors monitor each other using the onboard software to regulate the spas functions of water flow and temperature. This technology allows for a correct operating environment for the heater. The sensors automatically adapt to the flow direction and detect restrictions including dirty filters.
This Balboa heater assembly is quick to install and allows for easy servicing and troubleshooting, due to the split 2 inch buttress thread unions with O ring. The union is ready to accept glued 2 inch pipework.
Note:
Always use an appropriate spanner or long nose pliers to hold the terminal base before tightening or loosening the 10mm terminal nuts.
Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support
Technical Specifications
| Mount Type | Band |
| Sensor Type(s) | M7 - Probe |
| Amp | 8.0-8.5 |
| Length (includes tails) | 495 |
| Supply V/Hz | 230V / 50Hz |
| Min Flow | 21gpm |
| Plumbing Connection | 2.0'' |
| Compatible Spa Pack | Balboa GS/GL Metal Box |
| Type | Flow Thru |
| Element | Incoloy |
| Power | 2.0 |
| Voltage / Hz | 230V - 50/60Hz |
| Amps | 8.0-8.5 |
| Element Length | 10" (255mm) |
| Terminal Spacing | 33 |
| Element Type | Incoloy |
| Integrated in Spa Pack | Yes |
| MPN | 58063 |
| HTDIY SKU | 30031 |
| Sash 1 | Fits GL Metal Box Spa Packs |
| Sash 2 | 2.0kW |
| Sash 3 | Incoloy Element |
| Sash 4 | 2" x 2" Tailpiece |
| Warranty Available Sash | 1 |
| 360 Folder | 0282 |
| 360 Folder Image Count | 23 |
| Extras Tab Title | Spares |
| Hide package contents in basket | Hide |
| Upsells Tab Diagram | 8121.00000 |
Reviews (0)
Reviews (0)
Questions & Answers
Related Products
- Gecko Heat.Wav in.yj Heater - 3.0kW
Works with IN.YJ Controls
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandHTR-8215£180.28(inc VAT)SAVE £80.99 - HydroQuip Rite-Fit Heater - 5.5kW
Works with Various Spa Packs
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandHTR-8668H£108.44(inc VAT)SAVE £36.14 - Therm RMF Replacement Heater - 1.4KW
Works with Gatsby & other spas
In Stock, but discontinuedThe last 1 of our physical stock before this product is discontinuedHTR-5611£264.99(inc VAT) - Gecko Heat.Wav Heater - 2.0kW
Works with IN.XE & IN.YE Controls
7 In StockSame day dispatch by 14:00HTR-6424£224.78(inc VAT)SAVE £24.97 - Gecko AeWare IN.THERM Remote Heater - 3.8kW
Works with IN.XM Only
7 In StockSame day dispatch by 14:00HTR-5894£513.45(inc VAT)SAVE £342.30 - Arctic Spas Curved Tee Heater - 3.6kW
Supplied with unions and cable
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandHTR-5614£226.50(inc VAT)SAVE £75.49 - Hydroquip Dual Heater (Two Elements)
8kW (2 x 4kW) - Replaces Part No. C2800-3117
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandHTR-9418£259.21(inc VAT)SAVE £86.41 - Gecko Heat.Wav Heater - 3.0kW
Works with IN.XE & IN.YE Controls
4 In StockSame day dispatch by 14:00HTR-7804£205.14(inc VAT)SAVE £22.79 - HydroQuip M-Class Heater - 3.6kW
For Gecko M-Class Packs
3 In StockSame day dispatch by 14:00HTR-5627£157.79(inc VAT)SAVE £52.60 - HydroQuip Rite-Fit Heater - 2.5kW
Works with Various Spa Packs
3 In StockSame day dispatch by 14:00HTR-8663H£137.93(inc VAT)SAVE £45.97 - SpaNet 5.25kW Heater
Version 2
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demand10186£422.95(inc VAT)SAVE £140.98 - HydroQuip Rite-Fit Heater - 3kW
Works with Various Spa Packs
Out of StockNot available to be orderedHTR-9675£117.13(inc VAT)SAVE £39.04 - Thermcore Universal Heater - 4.0kW
Works with SSPA Spa Packs
1 In StockSame day dispatch by 14:00HTR-5543£148.47(inc VAT)SAVE £49.49 - Laing FastFlo Replacement Heater - 2.1/3.4kW
Suitable for DIMENSION ONE SPAS (Manual Reset)
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandHTR-5544£450.85(inc VAT)SAVE £150.29 - Laing Square Back Replacement Heater - 2.1/3.4/5.5kW
Suitable for DIMENSION ONE SPAS (Manual Reset)
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandHTR-5608£395.72(inc VAT)SAVE £131.91 - SpaNet 3.0kW Heater
Version 1
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demand10178£365.35(inc VAT)SAVE £121.78
