- Hydrospares
- Hot Tub & Spa
- Equipment
- Pumps
- Wellis LX WTC50M Replacement Pump
Wellis LX WTC50M Replacement Pump
£111.00
INC VATProduct Details
The WTC Series has been designed to ensure it is efficient and energy saving. This pump features centre suction and side discharge, which is commonly found on most other popular brands of pump.
The WTC50M will self drain when switched off.
The highly reinforced plastic base is vibration-resistance and corrosive-resistance while the Motor itself is low noise and creates little vibration, so will quietly do its job allowing you, or your customers, to enjoy the hydro massage bathtub or spa.
It would most commonly be used as a circulation pump on hot tubs and swim spas. But can also be fitted to many whirlpool baths as well.
A wide range of models across the range means you can often replace more expensive pump brands with these great alternatives.
Unions available separately
Cable Supplied
Please Note:
LX pumps are not fitted with air switches.
Air switches or pneumatic control boxes can be fitted by a qualified electrician to these pumps.
Technical Specifications
| MPN | WTC50 |
| Type / Speed | Circulation |
| Frame Size | 48F |
| Voltage / Frequency | 230V / 50Hz |
| Power - P1 | 0.25 |
| Amp Draw | 1.0 |
| RPM | 1400 |
| Capacitor Size(s) | 7 |
| Model | WTC |
| Spare Parts Available | Yes - See Spare Parts List |
| Dimensions L x W x H | 300x165x200mm |
| HEAD - H max | 3.8m |
| FLOW - Q max | 240 L/min |
| Air Switch | No |
| Warranty Available | 1 |
| HTDIY SKU | 21009 |
| Sash 1 | Replacement Pump |
| Sash 2 | Circulation Pump |
| Sash 3 | 0.35HP |
| Sash 4 | 1 ½" x 1 ½" (63mm x 63mm) |
| Dimension Drawing | 26857.00000 |