- Hydrospares
- Hot Tub & Spa
- Spares & Accessories
- Pump Spares & Accessories
- Complete Wet Ends
- LX Wet End Assembly - 3HP - 2" x 2"
LX Wet End Assembly - 3HP - 2" x 2"
£73.66
INC VATProduct Details
LX - 56F Wet End Assembly LP300 / WP300 - 3.0HP - 2" x 2"
Direct replacement wet end complete with shaft seal for LP300 & WP300 pumps manufactured after 2008.
** 2008 LP & WP pumps and wet ends are manufactured with a shorter suction (approx. 15mm) and discharge port (approx. 30mm). You may find on some hot tubs with very rigid plumbing that the newer versions will not line up with pipework. The wet end faceplate moulding is different and they are also "open" on the rear of the wet end casing as opposed to the pre 08 wet ends which are encased. SEE IMAGES.
If you are replacing a pre '08 version we are finding that the Waterway Executive equivalent tends to fit better.
Technical Specifications
| Configuration | Center Suction, Side Discharge |
| Impeller Diameter | 116 mm |
| Union Connection Ref | 2.0 |
| Connection Diameter | 79mm |
| Spare Parts Available | No |
| Thread Type | Male - Buttress |
| Impeller Vane Gap | 12.5 mm |
| Wet End Frame Size | 56F |
| Wet End HP | 3.0 |
| HTDIY SKU | 14011 |
| Help Article ID | 142, 53, 89 |
| Sash 1 | LX LP300/WP300 |
| Sash 2 | 56F |
| Sash 3 | 3HP |
| Sash 4 | 2" x 2" (79mm x 79mm) |
| Warranty Available Sash | 1 |
| Extras Tab Title | Spares |
| Hide package contents in basket | Hide |
| Wet End Diagram | 14145.00000 |