Waterway Executive 56F Wet End - 5HP - 2" x 2 ½"
£112.76
INC VATProduct Details
Waterway Wet End - 56 Frame - 2 ½" Suction. For 2HP Pumps
- OEM wet end for the Waterway Executive hot tub pump range
- Fits 56 Frame motors, both European (finned) and American (smooth) style
- The 2 ½" suction on these wet ends allows for a greater intake flow of water. Fits a 2 ½" suction union and a 2" discharge union
- Fitted with 3 x drain/bleed screws
- Please Note: This wet end is labelled as 5HP (impeller HP rating). Motors and wet ends are combined to create an output HP
- This wet end is commonly found on 56 frame 2.5 & 3HP Waterway pumps and is the correct replacement wet end for 2.5 & 3HP complete pumps
- 5Hp
- 56F Volute number: 315-1220 (stamped on rear)
- Impeller P/N: 310-4180
- Impeller Dot Colour: None
Part Number
- Waterway: 310-1510
Technical Specifications
| Configuration | Center Suction, Side Discharge |
| Impeller Diameter | 117 mm |
| Union Connection Ref | 2.5 |
| Connection Diameter | 79mm x 93mm |
| Spare Parts Available | Yes - See Spare Parts List |
| Thread Type | Male - Buttress |
| Part No. | 310-1510 |
| Impeller Dot Colour | None |
| Impeller Part No. | 310-4180 |
| Shaft Seal Type | PS-1000 |
| Impeller Vane Gap | 15 mm |
| Wet End Frame Size | 56F |
| Warranty Available | 1 |
| Impeller HP Rating | 5HP |
| Wet End HP | 5.0 |
| Help Article ID | 142, 53, 89 |
| Upsells Tab Title | Spare Parts |
| Sash 1 | Waterway |
| Sash 2 | 56 Frame / 104mm |
| Sash 3 | 5HP |
| Sash 4 | 2" x 2 ½" (79mm x 93mm) |
| Extras Tab Title | Spares |
| Hide package contents in basket | Hide |
| Wet End Diagram | 14121.00000 |
| Upsells Tab Diagram | 7983.00000 |
Reviews (3)
Reviews (3)
We contacted Hydrospares after our hot tub would not work and the company who supplied it quoted £500. After several phone calls and chats we purchased the wet end only, £100 and it came the next day! Everyone we spoke to were exceptionally helpful, as we did not really not know what we wanted. Brilliant service. Thank You!
Found staff, especially Gosia, very helpful and prompt. Overall I was given good advice to find my compatible part which was promptly delivered. Very good overall service. Thanks
We contacted Hydrospares as our Jacuzzi motor had ceased, the patience that the online staff (Richard & Goisa) had with us was fantastic as we didn´t know anything about what we needed. They went through everything and their help was brilliant I can not sing their praises high enough, we received the part , it fitted and the Jacuzzi is working. So happy....Thank you so much.
Questions & Answers
Does this pump have a 2 Inch discharge. I hope to fit it on a Winnipeg Canadian Spa. Many Thanks
Related Products
- Koller Compact Wet End
Self Drain - 1.0Hp
2 In StockSame day dispatch by 14:00WET-4384£52.06(inc VAT)SAVE £11.43 - Gecko Flo-Master 56F Wet End - 1.5HP - 2" x 2"
For Use with XP2e - Euro leg 6.1"
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandWET-7075£126.22(inc VAT)SAVE £31.55 - Gecko Flo-Master 48F/ 56F Wet End - 3HP - 2 ½" x 2 ½"
For Use with Aqua-flo XP3
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandWET-5478£109.99(inc VAT) - Balboa 48F/ 56F Wet End - 3HP - 2" x 2"
For Use with Niagara / Ultimax (Vico)
8 In StockSame day dispatch by 14:00WET-4577£81.99(inc VAT)SAVE £20.42 - Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandWET-5832£27.96(inc VAT)SAVE £6.14
- Waterway Spa Flo II 48F Wet End - 1HP - 1.5" x 1.5"
For Use with Spa Flo II
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandWET-3246£68.41(inc VAT)SAVE £22.80 - LX Wet End Assembly - 3HP - 2" x 2"
For Use with LP300 / WP300 - Post 2008
Awaiting DeliveryCan be put on back-orderWET-5805£73.66(inc VAT)SAVE £16.16 - Gecko Circ-Master XP Wet End - 1/15HP - 2" x 2"
For Use with Aqua-flo CMXP
1 In StockSame day dispatch by 14:00WET-7800£91.32(inc VAT)SAVE £22.83 - Gecko Flo-Master 56F Wet End - 1.5HP - 2" x 2"
For Use with Aqua-flo XP2e - 6.3"
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandWET-5470£98.99(inc VAT)SAVE £24.73 - Koller Basic Wet End
Self Drain - 1.0 HP
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandWET-4385£50.59(inc VAT)SAVE £11.10 - Gecko Flo-Master 56F Wet End - 3HP - 2" x 2"
For Use with XP2e - Euro leg 6.1"
2 In StockSame day dispatch by 14:00WET-4350£139.63(inc VAT)SAVE £34.91 - Waterway Hi Flo 48F Wet End - 4HP - 2" x 2"
For Use with Hi Flo Pump
1 In StockSame day dispatch by 14:00WET-2686£106.71(inc VAT)SAVE £35.57 - Gecko Flo-Master 48F/ 56F Wet End - 4HP - 2 ½" x 2 ½"
For Use with Aqua-flo XP3
DiscontinuedNot available to be ordered, and never will be available to be ordered againWET-5480£109.99(inc VAT) - Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandFAC-5815£22.49(inc VAT)SAVE £3.59
- Gecko Circ-Master HP 48F Wet End - 1/15HP - 1.5" x 1.5"
For Use with Aqua-flo CMHP
3 In StockSame day dispatch by 14:00WET-4964£114.26(inc VAT)SAVE £28.57 - Gecko Flo-Master 56F Wet End - 4HP - 2" x 2"
For Use with Aqua-flo XP2e - 6.3"
Available to OrderNot enough physical stock available in retailable warehouse to fulfil, but is on demandWET-5474£101.49(inc VAT)SAVE £24.97
