Koller Electronic Control Box - 230 8091A

Koller Electronic Control Box Type 230 8091A, Variation S01 with speed regulation, 1 functions.

filling

Automatic filling through a button or a slot-machine.
Fill up through a button.
Filling time limit 10/20 minutes.

height control

minimum- /maximum height control
recovery time: 30/60 minutes

signal converter

push button signal / push button signal inverted
release sensor / release sensor inverted

zone roller

1-push-operation: one short push of the button changes the sequence or stops the program. A long push of the button puts the program into reference position.

rewash

Function is activated, if water was in the bath tub. Starts about 10 minutes after the tub is empty.
Alternatively it is possible to start / stop this function at empty tub with a button. duration of the rewash: 2 minutes

dry out

Starts automatically, if water was in the bath tub. The dry out starts about 20 minutes after the tub is empty.
Alternatively it is possible to start / stop this function with a button. duration of the dry out: 3 minutes

OFF-Timer

The running time limiter is activated, when the status indicator reads ?Pool ready? and the control panel registers the first pressing of the button. All whirlpool functions may be used as much, as you desire during the operating period. Upon reaching the running time limit, appliances switch off automatically. Should all functions be switched off during this time, the running time limiter will also reset automatically. The appliances may be immediately switched on after the automatic stop.

evacuation

evacuation valve:
After emptying the tub the drain of the remaining water opens automatically.